NTE Potentiometer - 2 Watt 50K Ohm - 1 Turn, 1/4" x 2" Inch Shaft
NTE
Potentiometer - 2 watt 50K Ohm 2" Shaft
501-0014
Features:
• Hot molded carbon element
• Stainless steel shaft and housing
• Gold plated terminals
• Available in Linear (KU) and Logarithmic (KA) taper
• Meets or exceeds specifications of MIL-R-94 — QPL Listed
Specifications:
Electrical Resistance Range: - Linear Taper (KU): 50Ω to 1 Meg Ω Resistance Range
- Logarithmic Taper (KA): 10KΩ to 1 Meg Ω
Resistance Tolerance: ± 10%
Linearity (independent): ± 0.20%
Noise: 100 Ω ENR
Rotation: 3600° +10°, −0°
Power Rating: 2 Watt @ 70°C derated to 0 Watts @ 125°C
Insulation Resistance: 10K Meg Ω (Dry)
100K Meg Ω (Wet)
Dielectric Strength: 900V RMS at sea level
Operating Voltage: 500V subject to power rating
Mechanical:
Mechanical Rotation: 314°
Operating Torque: 1 oz/in to 6 oz/in
Rotation Life: 25,000 cycles
Environmental:
Operating Temperature: -65°C to +125°C
Resistance to Soldering Heat: 350°C for 5 seconds
Load Life: 1000 hr. at 70°C
Potentiometer - 2 watt 50K Ohm 2" Shaft
501-0014
Features:
• Hot molded carbon element
• Stainless steel shaft and housing
• Gold plated terminals
• Available in Linear (KU) and Logarithmic (KA) taper
• Meets or exceeds specifications of MIL-R-94 — QPL Listed
Specifications:
Electrical Resistance Range: - Linear Taper (KU): 50Ω to 1 Meg Ω Resistance Range
- Logarithmic Taper (KA): 10KΩ to 1 Meg Ω
Resistance Tolerance: ± 10%
Linearity (independent): ± 0.20%
Noise: 100 Ω ENR
Rotation: 3600° +10°, −0°
Power Rating: 2 Watt @ 70°C derated to 0 Watts @ 125°C
Insulation Resistance: 10K Meg Ω (Dry)
100K Meg Ω (Wet)
Dielectric Strength: 900V RMS at sea level
Operating Voltage: 500V subject to power rating
Mechanical:
Mechanical Rotation: 314°
Operating Torque: 1 oz/in to 6 oz/in
Rotation Life: 25,000 cycles
Environmental:
Operating Temperature: -65°C to +125°C
Resistance to Soldering Heat: 350°C for 5 seconds
Load Life: 1000 hr. at 70°C
